In an effort to fulfill our customers' demands to provide a method of utilizing some of Sun Combustion,  Inc.'s innovative combustion technologies in their existing non-Sun Combustion, Inc.  burners and combustion systems, Sun Combustion, Inc. designed and developed the SRB SERIES™ RETROFIT BURNER SYSTEM. 

Improving the operating performance levels and increasing the fuel usage efficiencies of their existing burners and combustion systems were at the top of  the list of needs most customers requested but increasing the burner firing rate turndown ratio, lowering excess combustion air levels, solving main fuel light-off problems, lowering maintenance requirements, and being able to be installed without numerous modifications to the existing burner or combustion system  were also priorities.

Customers, whom had LOW NOX BURNERS installed at their facilities, complained of poor burner performance and of not being able to achieve required NOX levels on a production basis, wanted a solution to these problems so they would not be in violation of environmental regulations.

In addition, the initial cost of a retrofit burner system and the cost required to perform the necessary modifications to an existing burner and combustion system in order to incorporate the retrofit burner system must be economical and produce a reasonable return on investment (R.O.I.).

The SRB SERIES™ RETROFIT BURNER SYSTEMS fulfill all of our customers' needs and  requirements and, in fact, the results achieved by Sun Combustion, Inc.'s  SRB SERIES™ RETROFIT BURNER SYSTEMS far exceed our customers expectations.

SRB SERIES™ RETROFIT BURNER SYSTEMS typically:

The above information was obtained from approximately 100 SRB SERIES™ RETROFIT BURNER SYSTEM installation customers and / or their burner service providers.